Eat Natural MezzLift Specification — 250kg from Manual Hnadling Solutions (MHS.COM Ltd) Maximum Working Load 250kg Travel 2940mm floor to floor Platform Size 850mm x 1650mm to suit two trolleys Platform Guarding 900mm high frames, three sides to suit loading direction Lift Speed 0.3 m/s Number of stops 2 (ground and mezzanine) Power Supply Required 240v, 20amp, 1 phase terminated in a double pole isolator switch Controls Push to run controls adjacent to the gates at both levels Drive Type Chain drive, hydraulic motor, Additional independent fall arrest system Loading Configuration On/Off same side Pit None — loading via 50mm ramp External Shaft Size 1930mm x 1420mm Shaft Enclosure Self supporting 1″ x 1″ mesh shaft Door Type 2000mm Clear height double gate, mesh filled. Lift gates are protected by electrical interlocks to prevent access to the shaft unless the platform is docked at the appropriate level Documentation CE Mark with Declaration of Conformity Operation and Maintenance Manual issue on completion LOLER Report of Thorough Examination and Test issued on commission Training Operator training carried out on completionFull details from Manual Handling Solutions (MHS.COM Ltd) 58, Paige Close Watlington King’s Lynn, Norfolk PE33 0TQ UK Tel 01553 811977 Fax 01553 811004 sales@manualhandlingsolutions.co.uk www.manualhandlingsolutions.com